Recommended Printers: Inkjet Printers

Recommended Substrates: Light color Cottons, Polyester, Poly / Cotton Blends, some Nylons and Lycra.

Items needed: Computer, Graphics Software, Inkjet Printer, Heat Press, IW Jet II™ Transfer Paper
Recommend Application
Application Instructions:

1) CREATE DESIGN - Using graphics software, create a design and output it to an inkjet printer. *Be sure to print design in REVERSE / MIRROR format.

If printing a photograph:
a. In print options, select plain paper as paper type
b. Set printing mode to photograph
c. Print in either 360 dpi or 720 dpi mode
d. Allow photograph to dry thoroughly (15 mins. to 1 hr.)

If printing text or block designs:
a. In print options, select plain paper as paper type
b. Set printing mode to graphics or text style of printing
c. Print in either 360 dpi or 720 dpi mode
d. Allow photograph to dry thoroughly (15 mins. to 1 hr.)

2) CUT TRANSFER - After the design has dried, cut out the design leaving a 1/8" border around the design.

3) PREHEAT GARMENT - It is extremely important to preheat the garment before application. Press garment for 3-5 seconds to remove moisture and chemical treatment from the transfer area.

4) POSITION TRANSFER - After preheating the garment, position the cut transfer face down on the garment.

5) HEAT APPLY - Heat apply the design at a temperature of 350-360º F for 8 seconds using MEDIUM pressure. *PEEL HOT!

IMPORTANT: Please keep your IW Jet II™ paper in the plastic bag until actual use. This will keep moisture out of the paper. Close the bag after each use. 		 
CARE INSTRUCTIONS:
** Wash inside out in warm or cold water with mild detergent.
** Do not use bleach.
** Tumble dry at low setting.
** Do not iron directly on the design
** Do not sry clean

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.