Recommended Copiers: Color Laser Copiers with straight fed process.

Recommended Substrates: IW CLC will adhere to white or light color Cotton, Polyester and Poly / Cotton blends.

Items needed: Computer, Graphics Software, Color Laser Copier, IW CLC Transfer Paper, Heat Press.
Recommend Application for IW CLC Transfer Paper
Application Instructions:

1) CREATE DESIGN - Using graphics software, create a design and output it to the bypass tray of a color laser copier. Fan sheets prior to loading. *Be sure to print your design in the REVERSE / MIRROR format.

2) CUT DESIGN - Depending on your design, you may choose to use scissors and cut around the design so as not to leave a border.

3) PREHEAT GARMENT - It is extremely important to preheat the garment before application. Press garment for 3-5 seconds to remove moisture and chemical treatment from the transfer area.

4) POSITION DESIGN - After preheating the garment, position the design face down onto the garment.

5) HEAT APPLY - Heat apply the design for 8-10 seconds at 350º F using MEDIUM pressure. Peel backing immediately. PEEL HOT!

IMPORTANT:

* Please keep your IW CLC paper in the plastic bag until actual use. This will keep moisture out of the paper. Close the bag after each use.

*To brighten image on fabric after washing, press with an iron on medium setting.

*Best performance is obtained on cotton, polyester, poly/cotton, 50/50 blends and untreated canvas.
  
CARE INSTRUCTIONS:
** Turn garment inside out & machine wash in warm or cold water - mild detergent.
** Do not bleach.
** Tumble dry at a low setting.
** Do NOT dry clean.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.