Recommend Application - for Cottons, Polyester & Poly / Cotton Blends
Application Instructions:

*Reminder, SPECTRA™ Reflect Plus designs must be cut in REVERSE.

1) REMOVE - Remove the protective pink liner from the adhesive side of SPECTRA™ Cut Plus prior cutting.

2) PREHEAT - Preheat garment at a temperature of 320º F for 4 seconds to remove moisture and wrinkles.

3) APPLY - Apply SPECTRA™ Reflect Plus designs to
substrate for 4 seconds at a temperature of 320º F using
LIGHT pressure.

4) PEEL - After garment has completely cooled, remove
mylar backing from SPECTRA™ Reflect Plus. PEEL COLD!

5) COVER - Cover garment and SPECTRA™ Reflect Plus with Teflon sheet and heat press for an additional 10 seconds at the
temperature and pressure listed above. PEEL HOT!

Roll Size: Width 15" x 5yd, 10yd, 25yd, & 50 yd. rolls 		 
CARE INSTRUCTIONS:
** Machine wash using mild detergent at 86º F max.
** Dry at a normal dryer setting on household machines.
** Do not iron directly onto this material.
** Do not dry clean.
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.