Recommend Application for SPECTRA™ Reflect - for Cottons, Polyester & Poly / Cotton Blends
Application Instructions:

*Reminder, SPECTRA™ Reflect designs must be cut in REVERSE.

Peel clear protective layer prior to cutting.

1) PREHEAT - Preheat garment at a temperature of 330º F for 10 seconds to remove moisture and wrinkles.

2) APPLY - Apply SPECTRA™ Reflect designs to substrate for 2 seconds at a temperature of 330º F using LIGHT pressure.

3) PEEL - Remove mylar backing from SPECTRA™ Reflect. PEEL HOT !

4) Cover - Cover with teflon sheet and press for an additional 15 seconds

Roll Size: Width 15" x 5yd, 10yd, 25yd, & 50 yd. rolls 		 
CARE INSTRUCTIONS:
** Machine wash using mild detergent at 86º F max.
** Dry at a normal dryer setting on household machines.
** Do not iron directly onto this material.
** Do not dry clean.
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.