RECOMMENDED APPLICATION FOR SPECTRA™ Cut - For Cottons, Polyester & Poly / Cotton blends, acrylic blends and fleece
Application Instructions:

*Reminder, SPECTRA™ Neon designs must be cut in REVERSE.

1) PREHEAT - Preheat garment at a temperature of 320º F for 3-5 seconds to remove moisture and wrinkles.

2) APPLY ~ Apply SPECTRA™ Neon designs to substrate for 10 seconds at a temperature of 320º F using MEDIUM pressure.

3) PEEL - After garment has completely cooled, remove mylar backing from SPECTRA™ Neon. PEEL COLD! 		 
CARE INSTRUCTIONS:
** Machine wash using mild detergent.
** Dry at a normal dryer setting on household machines.
** Do not iron directly onto this material.
** Do not dry clean.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.