RECOMMENDED APPLICATION FOR SPECTRA™ EZ Weed- For Cottons, Polyester & Poly / Cotton blends
Application Instructions:

*Reminder, SPECTRA™ EZ Weed designs must be cut in REVERSE.

1) PREHEAT - Preheat garment at a temperature of 302º F for 4 seconds to remove moisture and wrinkles.

2) APPLY ~ Position EZ Weed application on garment and cover with Teflon® cover sheet then heat apply at 302º F for 10 - 15 seconds.

3) PEEL - After garment has completely cooled, remove mylar backing from SPECTRA™ EZ Weed. PEEL COLD!



All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.