RECOMMENDED APPLICATION FOR SPECTRA™ Cut - For Cottons, Polyester & Poly / Cotton blends
Application Instructions:

*Reminder, SPECTRA™ CUT designs must be cut in REVERSE.

1) PREHEAT - Preheat garment at a temperature of 330º F for 4 seconds to remove moisture and wrinkles.

2) APPLY ~ Apply SPECTRA™ Cut designs to substrate for 6 - 8 seconds at a temperature of 330º F using LIGHT pressure.

3) PEEL - After garment has completely cooled, remove mylar backing from SPECTRA™ Cut. PEEL COLD!

4) COVER ~ Cover garment and SPECTRA™ Cut with a Teflon sheet and heat press for an additional 3 - 5 seconds at the temperature and pressure listed above. PEEL HOT!

TWO COLOR APPLICATION  
1) PREHEAT (see above)

2) APPLY - Apply 1st color: 4 seconds and *PEEL COLD!

3) APPLY - Apply 2nd color: 8 seconds and *PEEL COLD!
 
CARE INSTRUCTIONS:
** Machine wash using mild detergent at 176º F max.
** Dry at a normal dryer setting on household machines.
** Do not iron directly onto this material.
** Do not dry clean.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.