SPECTRA™ Color Print 2 Tech Sheet

Recommend Application for Color Print 2

Application Instructions:

1) PRINT DESIGN - After printing and cutting, remove image from backing.

2) PREHEAT GARMENT - Preheat garment at a temperature of 305º F for 4 seconds to remove moisture and wrinkles.

3) HEAT APPLY - Apply SPECTRA™ Color Print 2 for 5 seconds at a temperature of 305º F using MEDIUM pressure. PEEL HOT.

4) COVER - Cover the applied design with a teflon sheet and heat apply again for 5 seconds at same time and temperature.
PEEL HOT.

CARE INSTRUCTIONS:
** Turn garment inside out & machine wash in warm or cold water - mild detergent. 122 F max. temp.
** Do not iron directly onto this material.
** Do not bleach.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.