Recommend Application for Solution Clear
Application Instructions:

1) PRINT DESIGN - Print and cut the design in the mirror image onto Solution Clear.

2) PREHEAT GARMENT - Preheat garment at a temperature of 305º F for 4 seconds to remove moisture and wrinkles.

3) PLACEMENT - Place SPECTRA™ Solution Clear where application is desired.

4) HEAT APPLY - Apply SPECTRA™ Solution Clear for 10 seconds at a temperature of 305º F using LIGHT pressure.

5) PEEL HOT!
 
CARE INSTRUCTIONS:
** Turn garment inside out & machine wash in warm or cold water - mild detergent.
** Do not iron directly onto this material.
** Do not bleach.
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.