Recommend Application for Color Print 2
Application Instructions:

1) PRINT DESIGN - After printing and cutting, remove image from backing with mask.

2) PREHEAT GARMENT - It is EXTREMELY important to preheat the garment before application. Press garment for 3-5 seconds to remove moisture and chemical treatment from transfer area.

3) HEAT APPLY - Heat apply the design for 5 seconds at 305º F using LIGHT pressure. Remove mask from the design. Peel HOT.

4) COVER - Cover the applied design with Solution Kraft Paper, matte side up, and heat apply again for 5 seconds at the same temperature and pressure.
  
CARE INSTRUCTIONS:
** Turn garment inside out & machine wash in warm or cold water - mild detergent. 122 F max. temp.
** Do not iron directly onto this material.
** Do not bleach.
** Tumble dry at lowest setting
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.