Recommend Application - for 100% Cotton, 100% Polyester, Poly / Cotton Blends, Nylon and Satin.
Application Instructions:

1) PREHEAT - Preheat garment for 4 seconds to remove moisture, chemicals, etc. (Use pillow if decorating full back.)

2) APPLY - Place twill cuts on garment. Cover with Teflon and heat apply according to the following specifications:

Manual Press
Pressure: Light/Medium

Temperature: 330° - 350° F

Time: 8-10 seconds

3) SEW - Twill decorations made from Pressure Sensitive Poly-TWILL™ must be sewn to prevent fraying.

**It is recommended to cure the garment for 48 hours once heat applied. 		 
CARE INSTRUCTIONS:
** Machine wash in cool water.
** Dry on medium heat.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.