Recommended Subtrates: Imprintables Prints for Darks designs will adhere to almost any DARK color fabric including: Cotton, Polyester, Poly / Cotton blends, Fleece, Nylons, Spandex & Leather

Items needed:
Solution™ Opaque designs, Solution™ Magic Mask, Solution™ Kraft paper, Heat Press
Recommend Application for Imprintables Prints for Darks
Application Instructions:

1) PREHEAT GARMENT - It is EXTREMELY important to preheat the garment before application. Press garment for 3-5 seconds to remove moisture and chemical treatment from transfer area.

2) POSITION DESIGN - Before positioning the design, remove design and magic mask from paper backing. Position the masked design face up on the garment.

3) HEAT APPLY - Heat apply the design for 3 seconds at
305º F using MEDIUM pressure. Remove Solution™ Magic Mask from the design once it has completely cooled. PEEL COLD!

4 ) COVER - Cover the applied design with Solution™ Kraft Paper and heat apply again for 8-10 seconds at the same temperature and pressure. PEEL HOT!
 
CARE INSTRUCTIONS:
** Turn garment inside out & machine wash in warm or cold water - mild detergent
** Do not bleach.
** Tumble dry at a low setting.

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.