Recommended Application - For Light Color Cottons, Polysester, and Poly/Cotton Blends
Application Instructions:

1) PREHEAT - Preheat garment for 10 secs. to remove moisture and wrinkles.

2) WEED - Weed excess material away from your precut names and/or numbers. If your names and/or numbers are already weeded, proceed to step 3.

3) POSITION - Position the design on the garment with the paper backing side face up. Cover with release paper to protect the heat platen from heavily dyed fabrics leaching color.

4) HEAT APPLY - Apply DuraCut™ team names and/or numbers for 15 secs. at the temperature of 320-338°F using HEAVY pressure. Raise platen slowly. COLD PEEL!

 
CARE INSTRUCTIONS:
** Turn garment inside out.
** Machine wash in warm or cold water (194°F max) using mild detergent.
** DO NOT BLEACH.


All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.