Recommended Application: Cottons, Polyester and Poly / Cotton blends
Application Instructions:

1) CUT DESIGN - Feed the sheet into the cutter. Be sure that the colored ink on the sheet faces up. Cut the design in REVERSE / MIRROR format. Weed away the excess material, leaving only the design on the paper backing.

2) PREHEAT - Preheat garment for 10 secs. to remove moisture and wrinkles.

3) POSITION - Position the design on the garment with the paper backing side face up. Cover with release paper to protect the heat platen from heavily dyed fabrics leaching color.

4) HEAT APPLY - Apply DuraCut™ for 15 secs. at the temperature of 320-338°F using HEAVY pressure. Raise platen slowly. COLD PEEL!

** Sheet Size 14" X 18" 		 
CARE INSTRUCTIONS:
** Turn garment inside out.
** Machine wash in warm or cold water (194°F max) using mild detergent.
** DO NOT BLEACH.


All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance under conditions not under manufacturer's control. Before using, please determine the suitability of product for it's intended use. The user assumes all risk and liability whatsoever in connection with the use of this product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective by the manufacturer.